When we use hydraulic lifting platforms in our daily lives, we need to regularly inspect, maintain, and upkeep them. This not only extends the service life of the hydraulic lifting platform, but also enhances its power during operation! For example, the transmission part should have sufficient lubricating oil, and vulnerable parts must be regularly inspected, maintained, repaired, or replaced. Mechanical bolts, especially those that frequently vibrate, such as slewing bearings and lifting arm connecting bolts, should be checked for looseness. If there is looseness, it must be tightened or replaced immediately. Next, let's take a look at the regulations for the maintenance time of hydraulic lifting platforms:
?
1. Daily maintenance.
After working for 1500 hours, perform minor repairs on the mechanical and electrical systems of the elevator.
3. After 5000 hours of operation of the elevator, perform intermediate repairs on the mechanical and electrical systems.
After 10000 hours of operation, the elevator will undergo major repairs to its mechanical and electrical systems.
Next, let's talk about the maintenance and upkeep of the hydraulic lifting platform mechanical equipment (sh è b è i):
1. The brakes of each institution should be regularly inspected and the clearance between the brake pads and brake wheels adjusted to ensure flexibility and reliability. There should be no dirt on the friction surface, and any dirt must be washed away with gasoline or thinner.
2. The lubrication of various parts such as gearbox, gearbox, external gear, and hydraulic oil shall be carried out according to the requirements in the lubrication table.
3. Pay attention to checking whether there are broken wires and loose strands in each part of the steel wire rope. If it exceeds the relevant regulations, it must be replaced immediately. The maintenance of steel wire ropes should strictly follow the provisions of GB514485.
4. Regularly check the connection of each part, and tighten if there is any looseness. The tightness of the connecting bolts of the machine body should be checked when the machine body is under pressure. All connecting shafts must have open pins and be fully opened.
5. Regularly inspect whether various institutions are operating normally and whether there is any noise. If any faults are found, they must be promptly eliminated.
When installing, disassembling, and adjusting the rotary mechanism, attention should be paid to ensuring that the centerline of the reducer of the rotary mechanism is parallel to the centerline of the gear, and its meshing surface is not less than 70%. The meshing clearance should be suitable.
7. Regularly check all wires and cables for damage. Timely bandage and replace the damaged parts.
8. If the motor overheats, it should be stopped in a timely manner, and the fault should be eliminated before continuing to operate. The lubrication of the motor bearings should be good. Atlas air compressor accessories.
After years of technical admiration and accumulation, the technical service personnel of the company (f ú w ù) ensure that the contact surfaces of each part of the electric brush are kept clean, adjust the pressure of the electric brush, and keep it regularly clean when in contact with various control boxes, distribution boxes, etc., and promptly clean the dust on electrical equipment (sh è b è i). We have extensive experience in troubleshooting, diagnosing, repairing, and maintaining hydraulic lifting platforms, and will provide high-quality after-sales service for our products.
{15}
