1、 Please pay attention to the safety operation manual and safety warning signs on the machinery, and understand the meaning of each sign.
2、 Operating instructions: 1. The operator must be familiar with the structure, performance, and safety operating procedures of the equipment, and must be authorized, pass the examination, and obtain a work permit before being allowed to operate independently. 2. The operator should maintain and upkeep the equipment, regularly clean and maintain the equipment, master emergency control and operation procedures, always remember that the operator is an important factor for safety, and prevent the occurrence of mechanical operation without following the maintenance manual requirements. 3. Before starting work, it is necessary to wear labor protection equipment according to regulations, carefully inspect each component and its lubrication condition, and ensure that protective devices are complete and intact. Only after passing the test drive can work be carried out. 4. Before starting work, the operator should assess the potential hazards in the workplace and ensure that the ground can withstand the total load capacity of the machinery. When the machinery is on other tools such as trucks, trailers, or ships, it is prohibited to operate the machinery or raise the platform; Identify and remove all potential hazards 5. Ensure that safety devices are operating properly. Without authorization and personnel operation from JLG, any modification of safety operations in a certain form is considered a violation of operating procedures. If the operating instructions and safety signs on the machinery are incomplete or damaged, the machinery cannot be operated; Machinery is only used for transporting workers and tools, and cannot be used for other purposes. 7. It is strictly prohibited to operate machinery with faults; Except in emergency situations, it is prohibited to control machinery at the ground control station when there are people on the platform; Prohibit using mechanical parts as support for other structures; Do not exceed the carrying capacity of the platform. Materials should not be placed on railings, tools should be placed on the platform, and attention should be paid to evenly distributing personnel and materials on the platform; When the main arm is located on the front axle, the walking and directional functions will perform reverse operations. 9. After completion, tidy up all parts of the machinery and turn off the engine or power checkpoint. 10. Personal protective equipment such as complete safety belts and helmets must be worn, and the safety belts must be fastened in designated positions. Only one safety belt can be fastened at each buckle position. 11. Before operation, ensure that the gate is closed and locked. When on the platform, keep both feet on the pedal and do not raise the platform to increase height. When entering the platform, face the operating platform and maintain "three-point contact"; 12. Be careful! "The high-altitude platform has no insulation and no insulation protection device. According to relevant regulations, an appropriate safety distance should be maintained from the charged body, and a distance for wire swinging should be reserved (see the regulations on the safety distance of charged bodies for details). 13. "Caution!" Operators should be familiar with the situation of the workplace before operation, and when the machinery is walking, it should not exceed the rated slope and side slope; When the machinery is stopped on a slope, uneven or unstable ground, it is forbidden to raise the platform or raise the platform for walking; During homework, pay attention to the surrounding conditions of the construction site to prevent accidents from occurring; Avoid extending body parts beyond the railing. Do not use machinery as a lifting device. Do not use machinery when the wind speed reaches or exceeds 48HM/H; Do not push or pull materials with the main arm, do not increase the platform area. 15. Define the safety zone and mark it in a prominent position. Do not work, walk or stand under the raised platform. All operators should maintain a distance of 1.8 meters from the high-altitude work platform. 16. Adjust the walking speed according to the ground conditions. When approaching obstacles or driving backwards, do not adjust the driving speed. 17. When welding operations, do not use machinery as grounding and pay attention to sparks falling on the machinery; When moving machinery, do not add oil. Batteries are highly corrosive and should be avoided from touching skin and clothing; When charging, the machine should be placed in a well ventilated area.
2、 Operating instructions: 1. The operator must be familiar with the structure, performance, and safety operating procedures of the equipment, and must be authorized, pass the examination, and obtain a work permit before being allowed to operate independently. 2. The operator should maintain and upkeep the equipment, regularly clean and maintain the equipment, master emergency control and operation procedures, always remember that the operator is an important factor for safety, and prevent the occurrence of mechanical operation without following the maintenance manual requirements. 3. Before starting work, it is necessary to wear labor protection equipment according to regulations, carefully inspect each component and its lubrication condition, and ensure that protective devices are complete and intact. Only after passing the test drive can work be carried out. 4. Before starting work, the operator should assess the potential hazards in the workplace and ensure that the ground can withstand the total load capacity of the machinery. When the machinery is on other tools such as trucks, trailers, or ships, it is prohibited to operate the machinery or raise the platform; Identify and remove all potential hazards 5. Ensure that safety devices are operating properly. Without authorization and personnel operation from JLG, any modification of safety operations in a certain form is considered a violation of operating procedures. If the operating instructions and safety signs on the machinery are incomplete or damaged, the machinery cannot be operated; Machinery is only used for transporting workers and tools, and cannot be used for other purposes. 7. It is strictly prohibited to operate machinery with faults; Except in emergency situations, it is prohibited to control machinery at the ground control station when there are people on the platform; Prohibit using mechanical parts as support for other structures; Do not exceed the carrying capacity of the platform. Materials should not be placed on railings, tools should be placed on the platform, and attention should be paid to evenly distributing personnel and materials on the platform; When the main arm is located on the front axle, the walking and directional functions will perform reverse operations. 9. After completion, tidy up all parts of the machinery and turn off the engine or power checkpoint. 10. Personal protective equipment such as complete safety belts and helmets must be worn, and the safety belts must be fastened in designated positions. Only one safety belt can be fastened at each buckle position. 11. Before operation, ensure that the gate is closed and locked. When on the platform, keep both feet on the pedal and do not raise the platform to increase height. When entering the platform, face the operating platform and maintain "three-point contact"; 12. Be careful! "The high-altitude platform has no insulation and no insulation protection device. According to relevant regulations, an appropriate safety distance should be maintained from the charged body, and a distance for wire swinging should be reserved (see the regulations on the safety distance of charged bodies for details). 13. "Caution!" Operators should be familiar with the situation of the workplace before operation, and when the machinery is walking, it should not exceed the rated slope and side slope; When the machinery is stopped on a slope, uneven or unstable ground, it is forbidden to raise the platform or raise the platform for walking; During homework, pay attention to the surrounding conditions of the construction site to prevent accidents from occurring; Avoid extending body parts beyond the railing. Do not use machinery as a lifting device. Do not use machinery when the wind speed reaches or exceeds 48HM/H; Do not push or pull materials with the main arm, do not increase the platform area. 15. Define the safety zone and mark it in a prominent position. Do not work, walk or stand under the raised platform. All operators should maintain a distance of 1.8 meters from the high-altitude work platform. 16. Adjust the walking speed according to the ground conditions. When approaching obstacles or driving backwards, do not adjust the driving speed. 17. When welding operations, do not use machinery as grounding and pay attention to sparks falling on the machinery; When moving machinery, do not add oil. Batteries are highly corrosive and should be avoided from touching skin and clothing; When charging, the machine should be placed in a well ventilated area.
